• Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14

DIY Plastic Path Maker Mold Manually Paving Cement Brick Stone Road Paving Mold Concrete Molds Tool for Garden Paving Accessory

R277.20
  • Color:

Categories:

Buy With Confidence

100% Safe Payment

;

  • Description

     

     

    Garden Path Maker Mold Plastic DIY Manually Paving Cement Brick Stone Road Concrete Mould
    Tips:
    1. Clean the concrete garden molds for reusing, spray them with garden hose.
    2. Garden stone mold can be used again right after you pour the first garden stepping stone so you do not have to wait.

    Application:
    1. Self-built houses, DIY design corridors, home roads, balconies, courtyards, gardens, vegetable plots, landscapes, swimming pools, art floors;
    2. Villas, plazas, municipalities, companies, factories, hotels, resorts, cafes, clubs, hot springs, building designers and builders;
    3. Booth construction design staff;
    4. Advertising company that temporarily sets up a set because of the need for advertising photography;

    How to use:
    Step 1:
    Mix the cement with water according to the packing instructions. When ready for use, the concrete will be the consistency of the oatmeal and thick enough to hold the edges when cut with a shovel.
    Step 2:
    Fill the paver mold, plow the concrete with a shovel and make sure to fill each area.
    Step 3:
    Use rubber gloves to spread the concrete around the mold and fill any gaps or low points. Tap the mold by hand to remove any air bubbles.
    Step 4:
    Smooth the concrete according to the contour of the mold and wipe off the excess.
    Step 5:
    Allow the concrete to set up to five minutes and carefully remove the mold. For the next stretch, rotate the mold a quarter turn and place it next to the paver you just finished. If you are creating a curved path, tilt it slightly.
    Step 6:
    After allowing the concrete to solidify overnight, fill the crack with dirt and rinse off the excess. Wet the ground around the newly formed paver to help them settle.

    Specifications:
    Material: PP resin
    Size: 40*40*2cm/15.7*15.7*0.79″

    Notes:
    1. There may be slight size deviations due to manual measurement, different measuring methods and tools. 
    2. The picture may not show the actual color of the item because of different photographing light, angle and display monitor.
     

    1 X Garden Path Maker Mold

       A Style

    272636.04-1

     

    272636.04-2
      B Style
    272636.03-1272636.03-3

    C Style

    278794.01-1

    278794.01-2
     
     
    HTB1.4utNwTqK1RjSZPhq6xfOFXa9

     D Style

    278794.02-1

    278794.02-2
    E Style
    278794.03-1
     
    278794.03-2

    FStyle

    289968.05-1

    289968.05-2

    G Style

     
     
     
    H Style
    272636.01-3
    272636.01-1
    I Style
    272636.02-1
    272636.02-2
     
     

     

     

     

     

    Garden Path Maker Mold Plastic DIY Manually Paving Cement Brick Stone Road Concrete Mould
    Tips:
    1. Clean the concrete garden molds for reusing, spray them with garden hose.
    2. Garden stone mold can be used again right after you pour the first garden stepping stone so you do not have to wait.

    Application:
    1. Self-built houses, DIY design corridors, home roads, balconies, courtyards, gardens, vegetable plots, landscapes, swimming pools, art floors;
    2. Villas, plazas, municipalities, companies, factories, hotels, resorts, cafes, clubs, hot springs, building designers and builders;
    3. Booth construction design staff;
    4. Advertising company that temporarily sets up a set because of the need for advertising photography;

    How to use:
    Step 1:
    Mix the cement with water according to the packing instructions. When ready for use, the concrete will be the consistency of the oatmeal and thick enough to hold the edges when cut with a shovel.
    Step 2:
    Fill the paver mold, plow the concrete with a shovel and make sure to fill each area.
    Step 3:
    Use rubber gloves to spread the concrete around the mold and fill any gaps or low points. Tap the mold by hand to remove any air bubbles.
    Step 4:
    Smooth the concrete according to the contour of the mold and wipe off the excess.
    Step 5:
    Allow the concrete to set up to five minutes and carefully remove the mold. For the next stretch, rotate the mold a quarter turn and place it next to the paver you just finished. If you are creating a curved path, tilt it slightly.
    Step 6:
    After allowing the concrete to solidify overnight, fill the crack with dirt and rinse off the excess. Wet the ground around the newly formed paver to help them settle.

    Specifications:
    Material: PP resin
    Size: 40*40*2cm/15.7*15.7*0.79″

    Notes:
    1. There may be slight size deviations due to manual measurement, different measuring methods and tools. 
    2. The picture may not show the actual color of the item because of different photographing light, angle and display monitor.
     

    1 X Garden Path Maker Mold

    HTB1smrXNVzqK1RjSZFvq6AB7VXaxHTB10zS5NYvpK1RjSZPiq6zmwXXaGHTB1PU99N7voK1RjSZFNq6AxMVXaD

     

     

     

Follow us on:

Subscribe to our Newsletter
Please wait...

Our website employs cookies. To access comprehensive information, kindly refer to our Privacy Policy. Your permission is sought for utilizing cookies that enhance your personalized interaction and enable targeted advertisements across the web. If you agree, please select ALLOW. Alternatively, you can opt out of all non-essential cookies by clicking DISALLOW.

Cookie Settings