FunDeal 433 Mhz Universal Wireless Remote Control Switch AC 110V 220V Learning Code 1CH RF Relay Receiver Lamp Light Controller

FunDeal 433 Mhz Universal Wireless Remote Control Switch AC 110V 220V Learning Code 1CH RF Relay Receiver Lamp Light Controller

Technical Data:

Input Power:AC 85V-250V;
Standby Current:<5MA ;
RF Frequency: 433 MHz;
RF working mode:superheterodyne ;
Receive sensitivity: >97dbm ;
Transmitting distance: 20-50m ( open space) ;
Decoding mode: software decoding;
Remote storage:25pcs ;
Support remote type: Learning code 1527code, Fixed code(Rolling code can be design) ;
Working mode:Momentary, Toggle, Latching; Wiring type:fixed terminal ;
Output Terminal :NO , NC ;
Dimension of PCB:53.8*31.2mm.

About the DC 12V 4CH Transmitter:

Operating frequency: 433.92MHz
Power by 3V Coin Cell Button Battery (Battery included ),
Material: PVC.
Button: 4 buttons
Size: 59mm x 28mm x 8mm;
Operating voltage: 3V ;
Operating Current: 12mA
Transmitting power: 10mw
Modulation mode: ASK (AM).
Encoding type: Learning.
Transfers distance: 80m.

Notice: Different options include different packages:

Package 1 Included:

(Only 1 transmitter) RF 433Mhz 1CH Remote Control X 1Pcs (Battery included);

Package 2 Included:

Only 1 Piece AC 220V 1CH Receiver module (KR2201) * 1pcs ( include Shell );

Package 3 Included:

1 Pcs * Receiver module (KR2201) ( include Shell ),
1 Pcs * Remote Control (include battery);

Package 4 Included:

1 Pcs * Receiver module (KR2201) ( include Shell ),
2 Pcs * Remote Controls (include battery).

Free Gift:

Cross screwdriver * 1pcs.

Attention Please:

Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.

About Working mode:

Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.

Clearing the code :

Push the learning button on the receivers for 8 times , the codes will be cleaned;
After clearing the code, all the remote control cannot work any more.

Learning the code :(momentary)

Push the learning key on the receiver once time, the LED will be on , it comes into momentary setting learning state mode. Then push the button of remote control ,LED indicator on the receiver board will flash 3 times, and then come off. It means learning successfully .

Learning the code : ( Toggle )

Push the learning key on the receiver twice time , the LED will be on , it comes into toggle setting learning state mode. Then push the button of remote control ,LED indicator on the receiver board will flash 3 times, and then come off. It means learning successfully .

Learning the code 🙁 Latching )

Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”. For example : button A = ON , button B = OFF Push the learning key on the receiver triple time , it comes into latching mode . Wait for a moment , the LED indicator on the receiver board will flash then come off. Push the remote button A . LED flash for 5 times . Push the remote button B . Led flash for 5 times . After 3 seconds , the LED indicator will be on again , learning successfully. A = ON , B = OFF .

NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .